• If the server is in a rack, remove it from the rack. See “Remove the server from the rails” on page 137.
• Remove any locking device that secures the server, such as a Kensington lock or a padlock.
• Place the server on its side with the cover up.
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
AU3iY3F7lq3qfqr5caGbIu
.
84
ThinkSystem ST50 V2 Maintenance Manual
To Next Page
Loading...
