Technical description 8100_A
19
The assignments of the digital inputs and outputs shown below correspond to the
factory setting. For switchign of the signal cables. only use relays with low-current
contacts. Relays with gold-plated contacts are suitable (part no. 321 351).
Connecting diagram of the digital inputs and outputs
- with external 24V supply
RFR TRIP-Reset JOG JOG
TRIP-Set oe inj.braking
without external 24V supply
RFR TRIP-Reset JOG JOG
TRIP-Set oe inj.braking
Lenze
Romp-generator
Omin input =output
not assigned
59
Ramp- generator
Omin input =output
not assigned
To Next Page
Loading...
