2
Technical description 8100_A
SAFETY INFORMATION
The equipment described is intended for use in industrial electrical drive systems.
Thls equlpment can endanger Ilfe through rotatlng machlnery
and high voltages, therefore It Is essential that guards for both
electrlcal and mechanlcal parts are not removed.
The followlng points should be observed for the safety of the personnei:
Only quallfled person neI familiar wlth the equlpment are permitted to InstalI,
operate and malntaln the devlces.
System documentatlon must be avallable and observed at all tImes.
All non-quallfled personnel are kept at a safe dlstance from the equlpment.
The system must be Installed In accordance wlth local regulations.
A qualified person, is someone who is familiar with all safety notes and established
safety practices, with the installation, operation and maintenance of this equipment
and the hazards involved. For more detailed definitions see IEC 364.
,
.
It is recommended that anyone who operates or maintains electrical or mechanical
equipment should have a basic knowledge of First Aid. As aminimum, they should
know where the First Aid equipment is kept and the identity of the official First
Aiders.
These safety notes do not represent a complete list of the steps necessary to ensure
safe operation of the equipment. If you wish further information, please contact your
nearest Lenze representative.
The information in this technical description applies only to the hardware and
software vers ions that are indicated on the cover page. If the version of your
equipment is not listed, then this manual must not be used. Lenze cannot be held
responsible for any malfunction resulting from the above.
The specifications, processes and circuitry described in this manual are for guidance
only and must be adapted to your own specific applications. Lenze does not
guarantee the suitability of the processes and circuitry described in this technical
description for individual applications.
The specifications in this manual describe the features of the products, without
guarantee.
Lenze personnel have carefully checked this manual and the equipment it describes,
but cannot be held responsible for any inaccuracies.
Technlcal alterations reserved.
lenze
To Next Page
Loading...
