Lenze E84DGFCR Series - Device and Application-Specific Safety Instructions; Residual Hazards

Lenze · Inverter Drive 8400 motec (PROFINET® option) · DMS 5.0 EN · 02/2019 · TD23 11
2 Safety instructions
2.2 Device and application-specific safety instructions
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2.2 Device and application-specific safety instructions
• During operation, the Communication Unit must be connected to the Wiring Unit and the Drive
Unit.
• With external voltage supply, always use a separate power supply unit, safely separated to EN
61800-5-1 in every control cabinet (SELV/PELV).
2.3 Residual hazards
Device protection
• The Communication Unit contains electronic components that can be damaged or destroyed by
electrostatic discharge.
Installation
( 19)
 Documentation for "Inverter Drives 8400 motec", control system, plant/machine
All the other measures prescribed in this documentation must also be implemented.
Observe the safety instructions and application notes contained in this manual.