1 About this documentation
4 Lenze · Inverter Drive 8400 motec (PROFINET® option) · DMS 5.0 EN · 02/2019 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
Contents
This documentation exclusively contains descriptions of the PROFINET bus system for the Inverter
Drive 8400 motec.
The properties and functions of PROFINET for Inverter Drives 8400 motec are described in detail.
Examples illustrate typical applications.
This documentation also contains the following:
• Safety instructions that must be observed
• The basic technical data of the communication module
• Information on versions of the Lenze standard devices to be used
• Notes on troubleshooting and fault elimination
The theoretical context is only explained as far as it is required for understanding the function of
the communication module.
This documentation does not describe any software provided by other manufacturers. No warranty
can be given for corresponding data provided in this documentation. For information on how to use
the software, please refer to the host (PLC, IO Controller) documents.
All brand names mentioned in this documentation are trademarks of their corresponding owners.
Tip!
Detailed information on PROFINET can be found on the homepage of the PROFIBUS user
organisation which also develops the PROFINET communication technology:
www.profibus.com
Screenshots/application examples
All screenshots in this documentation are application examples. Depending on the firmware
version of the field devices and the software version of the Engineering tools installed (»Engineer«),
screenshots in this documentation may differ from the representation on the screen.
Note!
This documentation supplements the mounting instructions and the "Inverter Drives
8400 motec" hardware manual supplied with the Communication Unit.
The hardware manual contains safety instructions which must be observed!
To Next Page
Loading...
