Lenze E84DGFCR Series - PROFINET Connection

Lenze · Inverter Drive 8400 motec (PROFINET® option) · DMS 5.0 EN · 02/2019 · TD23 23
5 Installation
5.2 Electrical installation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.2 PROFINET connection
PROFINET port 1
PROFINET port 2
• M12 socket, 5-pole, D-coded
• Wiring at terminal strip X31
Pin Signal Description
1 Tx + Data line (transmitted data, plus)
2 Rx + Data line (received data, plus)
3 Tx - Data line (transmitted data, minus)
4 Rx - Data line (received data, minus)
5- not assigned
• M12 socket, 5-pole, D-coded
• Wiring at terminal strip X32
Pin Signal Description
1 Tx + Data line (transmitted data, plus)
2 Rx + Data line (received data, plus)
3 Tx - Data line (transmitted data, minus)
4 Rx - Data line (received data, minus)
5- not assigned