Lenze E84DGFCR Series - Page 33

Lenze · Inverter Drive 8400 motec (PROFINET® option) · DMS 5.0 EN · 02/2019 · TD23 33
6 Commissioning
6.4 Setting the IP configuration
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
IP address
• The IP address is set/changed in C13000
.
Subnet Mask
• The subnet mask indicates which part of the IP address is evaluated as net ID or host ID.
• Valid subnet masks are defined in accordance with RFC 1878
• The subnet mask is set/changed in C13001
.
Gateway address
• The gateway address is valid if the network address of the IP address and the gateway address
are identical.
• If the gateway address and the IP address are identical, gateway functionality is not used.
• DHCP is not supported.
• The gateway address is set/changed in C13002
.