Monitoring functions
Overview of monitoring functions
10
201
EDBCSXA064 EN 3.2
Possible fault responses
l Lenze setting
ü Can be set
Monitoring
OffFail−QSPWarningMessageTRIPCode
SourceDescriptionFault message
0072 PR1 Check sum error in parameter set 1 Internal l
0074 PEr Program error Internal l
0075 PR0 Error in the parameter sets Internal l
0079 PI Error during parameter initialisation Internal l
0080 PR6 l For ECSxS/P/M:Internal fault
l For ECSxA: Too many user codes
Internal l
x: 0 = TRIP, 1 = message, 2 = warning, 3 = FAIL−QSP
1)
Adjustable in the DDS under Project Exceptional handling
2)
For ECSxA... only
To Next Page
Loading...
Need help?
General
