Function library
AIF1Out
12
255
EDBCSXS064 EN 4.0
User data
The eight bytes of user data to the fieldbus module can be assigned with
ƒ digital signals (1 bit).
ƒ analog signals (16 bits).
ƒ phase signals (32 bits).
The switch C6154 is used to assign the eight bytes of user data to the fieldbus module:
Value in
C6154
User data
Byte 1, 2 Byte 3, 4 Byte 5, 6 Byte 7, 8
0
AIF1Out−DctrlStat
AIF1Out−W1 AIF1Out−W2 AIF1Out−W3
16 bits (C6131/1) 16 bits (C6131/2) 16 bits (C6131/3) 16 bits (C6131/4)
1
AIF1Out−DctrlStat AIF1Out−W1 AIF1Out−W2/W3
16 bits (C6131/1) 16 bits (C6131/2) 32 bits (C6151/1)
2
AIF1Out−DctrlStat AIF1Out−W1 AIF1Out−W2 AIF1Out−Bit0 ... 15
16 bits (C6131/1) 16 bits (C6131/2) 16 bits (C6131/3) 1 bit (C6111/1 ... 15)
3
AIF1Out−DctrlStat AIF1Out−W1 AIF1Out−Bit0 ... 15 AIF1Out−W3
16 bits (C6131/1) 16 bits (C6131/2) 1 bit (C6111/1 ... 15) 16 bits (C6131/4)
4
AIF1Out−DctrlStat AIF1Out−Bit0 ... 15 AIF1Out−W2 AIF1Out−W3
16 bits (C6131/1) 1 bit (C6111/1 ... 15) 16 bits (C6131/3) 16 bits (C6131/4)
5
AIF1Out−DctrlStat AIF1Out−Bit0 ... 15 AIF1Out−W2/W3
16 bits (C6131/1) 1 bit (C6111/1 ... 15) 32 bits (C6151/1)
Note!
You can use byte 1 and byte 2 to transfer the status word from the DCTRL
function block ( 294) to the fieldbus module.
To Next Page
Loading...
