Lenze ECSES Series - Page 328

Function library
Speed (speed control)
Setpoint processing
12

328
EDBCSXS064 EN 4.0
Code Possible settings IMPORTANT
No. Designation Lenze/
{Appl.}
Selection
C0012 TIR (ACC) 0.000
Acceleration time for the
l speed setpoint (for "speed
control")
l torque setpoint (for "torque
control")
 327
0.000 {0.001 s} 999.999 Relating to speed variation
0 rpm ... n
max
(C0011)
C0013 TIF (DEC) 0.000
Deceleration time for the
l speed setpoint (for "speed
control")
l torque setpoint (for "torque
control")
 327
0.000 {0.001 s} 999.999 Relating to speed variation
0 rpm ... n
max
(C0011)
C0101 15 additional acceleration times
for the speed setpoint.
Can be retrieved via digital
signals SPEED−NSET.TIx.
 327
1 add Tir 0.000
0.000 {0.001 s} 999.999 Relating to speed variation
0 rpm ... n
max
(C0011)
2 add Tir 0.000
... add Tir 0.000
14 add Tir 0.000
15 add Tir 0.000
C0103 add Tif 15 additional deceleration times
for the speed setpoint.
Can be retrieved via digital
signals SPEED−NSET.TIx.
 327
1 add Tif 0.000
0.000 {0.001 s} 999.999 Relating to speed variation
0 rpm ... n
max
(C0011)
2 add Tif 0.000
... 0.000
14 add Tif 0.000
15 add Tif 0.000