Lenze EtherNet/IP E84AYCEO - Page 153

Lenze · E84AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 10/2013 · TD17 153
14 Implemented CIP™ objects
14.3 "AC Drive Profile" objects
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Supported service codes
24 Get / Set TorqueScale SINT Torque scaling factor
[Nm/2
TorqueScale
]
Value range: -128 ... 127
29 Get / Set RefFromNet BOOL Status of reference speed / reference torque
• 0: Reference via local setting on the device
or terminal
• 1: Reference via network (e.g. from the
scanner)
Service code
[hex]
Name Description
0x01 Get_Attributes_All Outputs a list of the attributes and the attribute's values for
a certain object.
0x0E Get_Attribute_Single Outputs the value of a certain attribute.
0x10 Set_Attribute_Single Changes the value of a certain attribute.
Attribute
ID
Service Name Data type Value