Lenze Smart Motor m300 MSEMA Series - Connections and Interfaces

Product description
Connections and interfaces
2
EN
29
Lenze ¯ MDKSEMA ¯ 5.0
2.2 Connections and interfaces
 Note!
You only have to open the cover of the Lenze Smart motor if you connect
an external brake resistor or if you implement the mains connection
without a QUICKON connector.
1.7 Nm
(15 lb-in)
PE
X1
X2
X5
X3
X4
1.7 Nm
(15 lb-in)
MSEMA_001
X1, X2 Control connections, M12 connectors, A−coded, pins
X3 Mains connection, QUICKON connector or M25 x 1.5 cable gland
X4 Connection of external brake resistor, M12 x 1.5 cable gland
X5 Connection of spring−applied brake (pre−wired at delivery)
PE Connection of second PE conductor