EasyManua.ls Logo

LERICA LEVAC 3 - Page 26

Default Icon
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
REV. 07 - Cod.: 1500230
Ed. 05 - 2015
Manuale d’istruzione
Operating and service manual / Mode d’emploi et d’entretien
Bedienungs- und Wartungshandbuch / Manual de uso y mantenimiento
IT EN
Evitare nel modo più assoluto l’aspira-
zione di liquidi, poichè possono causare
la rottura della pompa.
Non toccare la barra saldante (A)
dopo aver effettuato la saldatura
della busta poiché essa raggiun-
ge alte temperature.
TENERE LA CONFEZIONATRICE
SOTTOVUOTO LONTANO DALLA
PORTATA DEI BAMBINI
3) Non utilizzare coltelli o altri utensili aflati per
l’eliminazione di eventuali residui sulla barra
saldante: attendere sempre che si raffreddi pri-
ma di intervenire con attrezzi non aflati e non
appuntiti.
4) Per qualsiasi problema dovesse sorgere
(funzionamento difettoso o assistenza tecnica)
contattare il nostro servizio di assistenza clienti.
ATTENZIONE: non rimuovere per nes-
sunmotivol’adesivoditeon(B)posto
sulla barra saldante.
LA SICUREZZA ELETTRICA DI
QUESTO APPARECCHIO E’ ASSI-
CURATA SOLO SE ESSO E’ COL-
LEGATO CORRETTAMENTE AD UN
IMPIANTO DI MESSA A TERRA EFFICA-
CE, COME PREVISTO DALLE NORME DI
SICUREZZA.
IL COSTRUTTORE DECLINA OGNI
RESPONSABILITA’ PER EVENTUALI
DANNI CAUSATI DALLA MANCANZA DI
MESSA A TERRA NELL’IMPIANTO.
A
Absolutely avoid sucking liquids, as
theycancausebreakageofthepump.
Do not touch the sealing bar (A)
after sealing because it becomes
very hot.
KEEP THE VACUUM PACKAGING
MACHINE OUT OF CHILDREN’S
REACH
3) Do not use knives or other sharp utensils to
remove any residuals on the sealing bar: always
wait until it is cold and use tools that are not
sharp or pointed.
4) For any problems (faulty operation, technical
assistance) contact customer service for assi-
stance.
WARNING:DONOTremovetheteon
strip (B) on the sealing bar.
THE SAFETY OF THIS MACHINE
IS ONLY GUARANTEED IF THE
MACHINE HAS BEEN CORRECTLY
EARTHED.
THE MANUFACTURER DECLINES ANY
LIABILITY FOR DAMAGE CAUSED BY
FAILURE TO COMPLY WITH THE ELEC-
TRICAL SAFETY REGULATIONS.
B

Table of Contents