Ordering information and accessories
Leuze electronic CML 720i Ex 139
Table 17.11: Accessories - Device columns
17.6 Scope of delivery
• 1 transmitter incl. 2 sliding blocks (profile length from 2 m: 3 sliding blocks; profile length from 2.5 m:
4 sliding blocks)
• 1 receiver incl. 2 sliding blocks, (profile length from 2 m: 3 sliding blocks; profile length from 2.5 m: 4
sliding blocks)
• 1 set of operating instructions (PDF file on data carrier)
Part no. Part designation Description
549881 UDC-1000-S2-R Device column, U-shaped, profile height 1000 mm
549882 UDC-1300-S2-R Device column, U-shaped, profile height 1300 mm
549883 UDC-1600-S2-R Device column, U-shaped, profile height 1600 mm
549884 UDC-1900-S2-R Device column, U-shaped, profile height 1900 mm
549885 UDC-2500-S2-R Device column, U-shaped, profile height 2500 mm
549886 UDC-3100-S2-R Device column, U-shaped, profile height 3100 mm
Connection and interconnection cables, mounting brackets, IO-Link USB master (incl.
Sensor Studio
configuration software), etc., are not included in the delivery contents but must
rather be ordered separately.
Devices with rear connector outlet are also delivered with a cylinder and a screw. These extra
parts are needed for mounting with the BT-2R1 swivel mount (see table 17.8).
To Next Page
Loading...
