Leuze electronic CML 720i Ex - Block Evaluation of Beam Areas

Functions
Leuze electronic CML 720i Ex 34
1 Trigger In (on X1, e.g. pin 5)
2 Slave light curtain 3
3 Slave light curtain 2
4 Master light curtain 1
5 Trigger Out (on X1, e.g. pin 5)
Figure 4.13: Wiring example of three light curtains via internal trigger
The following example shows a configuration of three light curtains via internal trigger.
1 Master light curtain LC1
2 Slave light curtain LC2
3 Slave light curtain LC3
4 Total cycle time
Figure 4.14: Example: cascading via internal trigger
4.10 Block evaluation of beam areas
With this function, the quantity of data to be transmitted can be reduced by restricting the imaging accu-
racy. The minimum resolution of the light curtain is still retained.
2
1
5
1
4
3
LV2
LV1
t [µs]
LV3
LV1-OUT
1
2
3
4
t
LV2
t
LV3
t
LV1