Leuze electronic CML 720i Ex - Editing Selection Parameters

Device description
Leuze electronic CML 720i Ex 21
If the action mode is selected with the button, this means:
3.7.5 Editing selection parameters
Start beam
001
0
Rejects the current input value. The display returns to the higher-order menu level: Start Beam/
End Beam
Start beam
0010
Resets the current input value (0001) and allows the entry of new values.
IO Logic
IO Pin 2
Selects the “IO Logic” menu item with the bright background.
IO Logic
Positive PNP
With each actuation, displays the next option on this menu level, i.e., the display switches
between:
• Negative NPN
• Positive PNP
Selects the “Positive PNP” menu item with the bright background.