Leuze BPS 300i - 16 Appendix; Revision History; 1 Firmware; Bar Code Sample

Appendix
Leuze electronic BPS 300i 88
16 Appendix
16.1 Revision History
16.1.1 Firmware
Table 16.1: Revision History - Firmware
16.2 Bar code sample
16.2.1 BCB bar code tape with 40 mm grid
Figure 16.1: Continuous, 40 mm grid
Figure 16.2: Single label MVS, 40 mm grid
Firmware Function range Meaning
V 1.3.0 Firmware for all device models Support of device models BPS 300i,
BPS 301i, BPS 304i, BPS 307i, BPS 348i
PROFIBUS, PROFINET modules 25, 26
additional
Module 25 signals device status
Module 26 signals extended status informa-
tion (orientation of the BPS to the BCB)
PROFIBUS, PROFINET modules 4, 5
extended
Switching output functions extended with
velocity limit value 1 … 4
V 1.4.0 PROFIBUS, PROFINET module 28 addi-
tional
Output of 16-bit position value
Minimum traverse rate reduced Speed measurement with low traverse rates
from 0.3 m/min
000000 000004 000008 000012