Technical data
Leuze electronic GmbH + Co. KG BPS 37 11
4 Technical data
4.1 General specifications BPS 37
Table 4.1: General specifications
Optical data
Light source Laser diode
Laser class 2 acc. to IEC 60825-1:2014
Wavelength 655nm
Max. output power (peak) 1.8mW
Impulse duration 120µs
Scanning rate 1000 scans/s
Measurement data
Reproducibility (3 sigma) -1 mm
Response time 16ms (configurable)
Output time 2ms
Basis for contouring error calculation 7ms
Working range 90 … 170 mm
Electrical data
Interface type
(Standard setting)
SSI (RS422)
Electrically isolated
Bits 0 … 24: data bits with position value
Bit 25: error bit
Resolution: 1mm
800 kHz max. clock frequency
Output of positive and negative position values
Gray coded
Service interface RS 232 with fixed data format,
9600Bd, 8 data bits, no parity, 1 stop bit
Ports 1 switching output, 1 switching input
Green LED Device ready (power on)
Operating voltage 10 … 30 V
Power consumption 3.2W
Mechanical data
Degree of protection IP 65
Weight 400 g
Dimensions (H x W x D) 120 x 90 x 43 mm
Housing Diecast aluminum
Environmental data
Recommended processing tempera-
ture
+10 °C … +25 °C
Processing temperature 0 °C … +45 °C
Operating temperature range Without optics heating: 0°C … +40°C
With optics heating: -30°C … +40°C
Storage temperature range -30°C … +60°C
Air humidity Max. 90% rel. humidity, non-condensing
Vibration IEC 68.2.6
IEC 68.2.27 (shock)
IEC 801
Electromagnetic compatibility Acc. to IEC 60947-5-2
Bar code tape
Max. length (measurement length) 10000 m
Ambient temperature -40 °C … -120 °C
Mech. properties Scratch and wipe resistant, UV resistant,
moisture resistant, partly chemical resistant
To Next Page
Loading...
