Maintenance
Leuze electronic GmbH + Co. KG BPS 37 32
10 Maintenance
10.1 General maintenance information
Usually, the bar code positioning system BPS 37 does not require any maintenance by the operator.
Cleaning
Clean the glass window of the BPS 37 with a soft cloth when soiled.
10.2 Repairs, servicing
Repairs to the device must only be carried out by the manufacturer.
Contact your Leuze distributor or service organization should repairs be required.
For addresses, please refer to the back page of this operating manual.
NOTE
Do not use aggressive cleaning agents such as thinner or acetone for cleaning the device.
To Next Page
Loading...
