Communication with the device
Leuze electronic GmbH + Co. KG BPS 37 31
The various setting options are con-
tained in the measurement value
control folder. These are used for
activating or deactivating the mea-
surement process.
Measurement value
Measurement value prep
-
This folder contains the parameters
which can be used to prepare the
measurement value. This includes
e.g. setting the initial or preset value,
the scaling setting, the counting
direction or the resolution.
Measurement value ranges can be
defined in this folder. If the mea-
surement values rise above or drop
below these values, the BPS should
respond appropriately.
Measurement value monitoring
In this folder the activation and
deactivation as well as the timing of
the switching output are defined.
Switching output
Settings can be made in this folder
for controlling how the BPS reacts
to the application of a 24 V signal.
Switching input
This folder contains all settings nec-
essary for integrating the BPS to a
control or drive system via an SSI
interface.
SSI interface
To Next Page
Loading...
