16
Login Window
Power on local console monitor, and power on the KVM Switch by plug in the power
adapter, the Login window will show up waiting for user name and password.
The Login
The default is SUPERVISOR and default user name is eight zeros “00000000”.
The default password is eight zeros “00000000”.
After login or port switch by panel button, OSD or Hotkey, the Status screen will show up to
display the information of current settings -- one digit BANK NUMBER, two-digit PORT
NUMBER, PORT NAME, and current Hotkey settings. Pressing any key or moving mouse
will let the Status screen disappeared.
The Status
The selected bank The selected
ort name
The selected
Auto-LOGOUT function
In Login window, if no input for username and password over 1 minute, the screen will
disappear. Hit any key to bring up the Login window again.
At normal operation, if no input from the console keyboard or mouse over 10 minutes
the KVM switch will turn off the screen display and show up Login window asking for
user name and password. One more minute of keyboard/mouse inactivity, the monitor
will be turned off (notice the monitor LED turns from green color to orange color).
To Next Page
Loading...
Need help?
General