18
■ USER --- There are two types of user levels: SUPERVISOR and USER. The default is
SUPERVISOR. SUPERVISOR can setup and change the OSD settings at Main Menu.
USER can only do the port switch and port search.
■ SCAN TIME --- This is the time interval for auto-scan function. When auto-scan
function is activated, the KVM switch will auto-scan the host port one by one in the
interval as setting. Notice that the port without connecting to a computer/server will be
skipped over on the scan.
■ The numeric keypad is not supported, while in OSD screen, the arrow keys, PgUp,
PgDn, and Enter keys are supported.
Main Menu
There are eight menus to choose from.
To Next Page
Loading...
