Server:
2. Enter the required data, as described
above.
3. Click "Add".
4. The new Server will now appear in the list.
Modify (Edit) a
Server:
1. Select the desired Server from the list
2. Make any desired changes (for example,
change the Enable/Disable setting).
3. Click "Update Selected Server" to save
changes to the selected Server.
Delete a Server:
1. Select the entry from the list.
2. Click "Delete".
Note: You can only delete Servers you have
defined. Pre-defined Server cannot be
deleted.
From the Internet, ALL Virtual Servers have the IP
Address allocated by your ISP.
Connecting to the Virtual Servers
Once configured, anyone on the Internet can connect to your Virtual
Servers. They must use the Internet IP Address (the IP Address
allocated to you by your ISP).
e.g.
http://203.70.212.52
ftp://203.70.212.52
It is more convenient if you are using a Fixed IP Address from your
ISP, rather than Dynamic. However, you can use the Dynamic DNS
feature to allow users to connect to your Virtual Servers using a URL,
rather than an IP Address.
108
To Next Page
Loading...
