Login
Login Method
If your ISP does not use a login method (username,
password) for Internet access, leave this at the
default value None (Direct connection).
Otherwise, check the documentation from your
ISP, select the login method used, and enter the
required data.
• PPPoE - this is the most common login
method, widely used with DSL modems.
Normally, your ISP will have provided some
software to connect and login. This software is
no longer required, and should not be used.
• PPPoE (Unnumbered IP) - this can only be
used if your ISP supports this system, and has
allocated you multiple IP addresses. If
selected, you must also select "Specified IP
Address" above and enter one of the IP
addresses allocated to you by your ISP. The
other IP addresses must be assigned to PCs
on your LAN.
• PPTP - this is mainly used in Europe. You
need to know the PPTP Server address as well
as your name and password.
• Big Pond Cable - for Australia only.
• SingTel RAS - for Singapore only.
• L2TP - this is not widely used. You need to
know the PPTP Server address as well as your
name and password.
Login User
Name
The User Name (or account name) provided by
your ISP.
Login
Password
Enter the password for the login name above.
RAS Plan
For SingTel customers only, select the RAS plan
you are on.
112
To Next Page
Loading...
