LevelOne WBR-6000 - Page 135

Data - QoS Screen
QoS Setting
QoS Setting
To disable QoS (Quality of Service), keep the default
setting, Disable. To enable QoS (Quality of Service),
click Enable and follow these instructions.
Category
• Applications:
• Add a New Application (Once selected,
please complete the following setups.)
• Priority: Select the desired option
• Add: Click to add your QoS setting into the
Summary list.
• IP Address
• Enter a Name. Enter a name for your
device.
• LAN PC IP: Enter the IP address of your
device.
• Priority: Select the desired option
• Add: Click to add your QoS setting into the
Summary list.
Summary
Priority
The general Information of this Application or IP
Address.
Name
The Name of this Application or IP Address.
Information
The general Information of this Application or IP
Address.
129