EasyManua.ls Logo

LevelOne WBR-6000 - Page 146

LevelOne WBR-6000
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Allow VPN
Pass through
The IPSec, PPTP, and L2TP protocols are used to
establish a secure connection, and are widely used
by VPN (Virtual Private Networking) programs.
If checked, these VPN connections are
allowed.
If not checked, these VPN connections are
blocked.
Note: IPSec sessions must NOT use AH
(Authentication Header). Packets using AH cannot
be routed correctly.
Drop
fragmented
IP packets
If enabled, fragmented IP packets are discarded,
forcing re-transmission of these packets. In some
situations, this could prevent successful
communication, so this setting is normally disabled.
Block TCP
Flood
A TCP flood is excessively large number of TCP
connection requests. This is usually a DoS (Denial
of Service) attack. This setting should be normally
be enabled.
Block UDP
Flood
A UDP flood is excessively large number of UDP
packets. This is often a DoS (Denial of Service)
attack, but some streaming applications also use
UDP, and blocking UPD packets may prevent them
from working correctly.
Block non-
standard
packets
Abnormal packets are often used by hackers and in
DoS attacks, but may also be generated by other
network devices. (PCs will normally not generate
non-standard packets.) This setting is disabled by
default, but on most networks it can safely be
enabled, and doing so will provide greater
protection.
140

Table of Contents

Other manuals for LevelOne WBR-6000

Related product manuals