Figure 23: TCP/IP Properties (Win 2000)
5. Ensure your TCP/IP settings are correct, as described below.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address
automatically. This is the default Windows setting. Using this is
recommended. By default, the Wireless Broadband Router will act
as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the Wireless
Broadband Router.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network
administrator before making the following changes.
• Enter the Wireless Broadband Router's IP address in the Default
gateway field and click OK. (Your LAN administrator can advise
40
To Next Page
Loading...
