Accessing AOL
To access AOL (America On Line) through the Wireless Broadband
Router, the AOL for Windows software must be configured to use
TCP/IP network access, rather than a dial-up connection. The
configuration process is as follows:
• Start the AOL for Windows communication software. Ensure that
it is Version 2.5, 3.0 or later. This procedure will not work with
earlier versions.
• Click the Setup button.
• Select Create Location, and change the location name from
"New Locality" to "Wireless Broadband Router".
• Click Edit Location. Select TCP/IP for the Network field. (Leave
the Phone Number blank.)
• Click Save, then OK.
Configuration is now complete.
• Before clicking "Sign On", always ensure that you are using the
"Wireless Broadband Router" location.
46
To Next Page
Loading...
