Figure 39: Add Wireless Network
3. Configure this screen as follows:
• Enter the correct SSID, as used on the Wireless Broadband
Router. Remember the SSID is case-sensitive, so be sure to
match the case, not just the spelling.
• Set Network Authentication and Data Encryption to match
the Wireless Broadband Router.
• If using data encryption (WEP or WPA-PSK), enter the key
used on the Wireless Broadband Router. See the preceding
sections for details of WEP and WPA-PSK.
• Uncheck the options The key is provided for me
automatically and This is a computer-to-computer (ad hoc)
network.
• Click OK to save and exit.
63
To Next Page
Loading...
