users. This address is allocated by your ISP
(Internet Service Provider).
Connection
Status
This indicates whether or not the connection is
currently established.
• If the connection does not exist, the "Connect"
button can be used to establish a connection.
• If the connection currently exists, the
"Disconnect" button can be used to break the
connection.
Connection Log
Connection
Log
• The Connection Log shows status messages
relating to the existing connection.
• The "Clear Log" button will restart the Log,
while the Refresh button will update the
messages shown on screen.
Buttons
Connect
If not connected, establish a connection to your
ISP.
Disconnect
If connected to your ISP, hang up the connection.
Clear Log
Delete all data currently in the Log. This will make it
easier to read new messages.
Refresh
Update the data on screen.
73
To Next Page
Loading...
