22
4.2 Quickly to Setup a HomeGuard system
To setup the HomeGuard system it needs few steps to complete all the setting:
1. Connect all the IP cameras and FNS-1020v2 with WBR-6022, then power on all device
2. Make sure WBR-6022 is connected to internet (If you want to use IP cam function).
3. Press WPS button on WBR-6022 for 5 Sec
4. Press WPS button on IP Cam for 5 Sec (step 3. & 4. are optional) then wait for 20 Sec
5. Search new device and register them each
6. Change each device name if you need.
7. Change preferred domain name of WBR-6022 on Level1DNS service
8. Recording setup if you have FNS-1020v2 registered
9. View the video form the registered IP cameras
10. Playback: if you have FNS-1020v2, you can record & playback the video.
To Next Page
Loading...
