LEVIT E-bikes - VINKA DC40 E-bike Control System; Operation: Switching On;Off, Assistance, and USB Charging

To Next Page

To Previous Page

Switching On/O

1. Switch on the electric system power on the battery

Activate the battery by pushing the button on its housing.

2. Switch on the control panel of the e-bike.

Push the X buon on the display and hold it for several seconds. The system is switched o in the

same way. Hold the buon pushed for 4 seconds to switch o the frame baery. The system will

automatically switch o aer 15 minutes of inactivity to save energy (this period can be set by the user

– see parameter seing below).

Seing of assistance mode

To change assistance mode, briefly push the (+)(-) button. The highest level of assistance is

indicated as BOOST, whilst the no assistance level is indicated as OFF. The assistance mode is

set to ECO mode after the display is switched on.

WARNING The motor may vibrate for a short period of time during a low revolution ride

with a high degree of assistance set. If this happens, we recommend that you immediately

change the assistance mode to a lesser degree.

Walk Assistance

The Walk Assistance is activated by pushing the I button and subsequently pushing and

holding the (-) button that sets the assistance to Walk Assistance mode (the Walk Assistance

mode symbol X will be displayed). The Walk Assistance will be activated until you release the (-)

button. The purpose of this function is to make manipulation with the e-bike easier for its users.

Typically, it is used during walking with the e-bike. In this case, the e-bike speed will be between

4 and 6km/h. The walk assistance is switched off immediately after you release the button.

VINKA DC40 – e-bike controla

All Vinka models

Included with the bicycle is this USB adapter that is intended to connect to the rear of the

display to provide power to other devices. All displays mounted on LEVIT bicycles (with the

exception of LED displays) have a USB connector that provides power to external devices such

as mobile phones, GPS and others.

Lights activated

Baery status

Assistance mode

Ride data display

Motor power

indicator

Current speed

Service indicator

ONOFF