LEVIT E-bikes - Comprehensive E-bike Error Messages; General Error Codes and Causes

9
Error messages
Code Cause of the problem
07 Protection against baery surge (check the baery voltage).
08 Error of the motor’s Hall probe (check seings and connection with motor).
09 Error of the motor’s phase cable (check seings and connection with motor)
11 Error of the control unit temperature sensor (check seings and connection
with the control unit).
12 Error of the torque sensor (check seings and connection with motor)
13 Baery temperature too high (switch o the system and wait).
14 Baery temperature too low (switch o the system and wait).
21 Error of the speed sensor (check seings and connection with motor)
22 BMS interface error (replace the baery).
25 Torque sensor error (remove the baery and replace it; if the error persists,
have your e-bike serviced).
30 Communication error (check that all connectors are connected correctly).