Levitronix BPS-200 User Manual

User Manual for BPS-200
www.levitronix.com
PL-4012-00, Rev07, DCO# 20-144
28
5.2 System Operation with Controller LPC-200.2 (PLC version)
5.2.1 State Diagram of the PLC Interface
Figure 30: PLC interface state diagram for standard firmware
Note 1: For other configurations refer to alternate firmware documentation
Off
Status : not active
State 1
Power On
ON
(Speed Control Mode)
Status : Active
Error : not active
State 5
ERROR
Status : not active
Error : active
State 4
Priming: off
Enable: active
Reset: not active
Reset: active
ON
(Process Control
Mode)
Status : Active
Error : not active
State 6
Internal
Error
Internal Error
Enable: not active
Process Mode:
active
Process Mode:
not active
ON
(Priming Mode)
Status : active
Error : not active
State 10
Priming: on
Enable: active
Reset: not active
Enable:
not active
Timeout,
Process
Mode:
not active
Timeout,
Process Mode:
active
Enable:
not active

Levitronix BPS-200 Specifications

General

Brand	Levitronix
Model	BPS-200
Category	Water Pump
Language	English