User Manual for LEVIFLOW
®
LFIF-06 Flowmeters
www.levitronix.com
PL-4511-00, RevA, DCO# RD
8 Appendix
8.1 Regulatory Status
8.1.1 CE Marking
The LEVIFLOW
®
LFIF-06 flowmeter, in its various configurations is in conformity with the below mentioned
European Directives. The flowmeter is thought to be used in hydraulic circuits of the production equipment of
Semiconductor and Chemical industry.
EMC Directive 2014/30/EC:
The following particular harmonized standards of the EMC Directive are tested and confirmed.
Generic Emission standard for industrial environments
Generic Immunity standard for industrial environments
Pressure Equipment Directive 97/23/EC:
The pressure equipment directive is used as guide line according to Category I Modul A (internal quality
control). For maximum pressure validation the following standard is followed:
Plastic piping system for industrial applications
Safety for machinery – principles for risk assessments: used for system risk analysis.
8.2 Symbols and Signal Words
Indication of an imminently hazardous situation that, if not
avoided, will result in death or severe injury. Limited to the
most extreme situation
Indication of a potentially hazardous situation which, if not
avoided, could result in death or severe injury.
Indication of potentially hazardous situations which, if not
avoided, could result in moderate or minor injury. Also alert
against unsafe practice.
Without safety alert indication of hazardous situation which,
if not avoided, could result in property damage.
Safety alert for “Warning” and “Caution”
Safety alert for “Danger”
Caution (refer to accompanying documents)
(is used on article labels for reference to manual)
Danger: electricity, electrical hazard
Hazard avoidance
Mandatory action
Table 8: Safety symbols and signal words
To Previous Page
Loading...
Need help?
General
