EN
15
Make sure the water tank is properly in place
(see Getting Started, page 7).
Set mist level to a lower setting.
is normal.
contact Customer Support (see page 18).
Make sure the water tank is properly in place
(see Getting Started, page 7).
White dust appears around
using water with high mineral content, such as tap water.
Care & Maintenance, page 12).
Water visibly leaks from the
Do not
Check the water tank for leaks. If there are leaks, contact Customer
Support (see page 18).
The area around the
or open a door or window to the room.
Make sure the water tank is properly in place
(see Getting Started, page 7).
Mold grows inside the
Clean the water tank and base chamber regularly (see Care &
Maintenance, page 12).
Problem Possible Solution
To Next Page
Loading...
Need help?
General
