12
EN
CARE & MAINTENANCE
Note:
•
•
•
•
do not
Note:
•
Never
Do not
•
Do not
Cleaning
tank, base chamber, and water tank every 3
days, and when you’re ready to store it.
1.
2. Remove and rinse the water tank cover.
[
Figure 6.1
]
3. Remove the water inlet tank from the
[
Figure 6.2
]
4. Pull the mist tube from the narrow end to
remove it. [
Figure 6.3
]
5.
[
Figure 6.4
]
6. Rinse the water inlet tank, mist tube, and
7.
out any water. Pour from the corner of
the base chamber to prevent water from
[
Figure 6.5
]
8. Use a small brush to clean the base
chamber. Rinse with room-temperature
water.
Note: Do not
9. Pour out any water in the water tank. Use
a brush to clean the inside of the tank,
then rinse with room-temperature water.
[
Figure 6.6
]
10.
cloth. [
Figure 6.7
]
Note: Do not
11.
all parts are completely dry before
reassembling or storing.
1.
water tank.
2.
mL of distilled white vinegar. [
Figure 7.1
]
3.
mL of distilled white vinegar [
Figure 7.2
]
4. Carefully swish the vinegar around the
tank and base chamber. Do not allow
liquid to contact the air outlet. [
Figure 7.3
]
5. Allow the parts to soak for 15–20
minutes. Vinegar will loosen scale
(mineral buildup) in the tank and base
chamber. [
Figure 7.4
]
6. Pour out the vinegar. [
Figure 6.5
]
7. Use a soft cloth and cleaning brush to
remove scale from all parts. [
Figure 7.5
]
buildup):
To Next Page
Loading...
