14
EN
Problem Possible Solution
Turn the mist level to a higher setting.
start misting.
aroma box are not blocked.
Care & Maintenance, page 12). Make sure the
nozzles are not blocked or clogged.
thoroughly with clean water to remove any detergent. Do not use
Customer Support (see page 18).
level is reached. Increase the target humidity or manually select a mist
level (see Auto Mode, page 9).
out of water faster.
place for 12 hours.
If essential oils were placed on the aroma pad, rinse the pad under clean
water and allow it to dry.
Clean the (see Care & Maintenance, page 12).
TROUBLESHOOTING
To Next Page
Loading...
