What to do if the Check Filter Indicator is still on after replacing the filters on my Levoit Air Cleaner?
If the Check Filter Indicator remains on after replacing the filters, reset the Check Filter Indicator.
Why does my Levoit Air Cleaner make unusual noises?
Unusual noises may be due to several factors. Ensure the filters are correctly placed and that all plastic packaging has been removed. Verify the air purifier is on a hard, flat, even surface. You may also need to replace the filters. If the noise continues, the air purifier may be damaged, or a foreign object may be inside. In this case, stop using it and contact Customer Support, and do not attempt to repair it yourself.
Why my Levoit LV-H132 is making unusual noises?
Unusual noises from your Levoit Air Cleaner can be due to several reasons. Dirty air filters may be the cause, so replace them. Also, ensure the filter fits properly. If you suspect a foreign object is inside the unit, immediately discontinue use and contact Customer Support. Do not attempt to open the air purifier.
How to fix Levoit Air Cleaner that does not turn on?
If your Levoit Air Cleaner isn't working, first ensure that it is properly connected to a powered electrical outlet. If it is plugged in, make sure the power button is on. Press the power button once to turn on the air purifier.
What to do if my Levoit Air Cleaner is making unusual noises?
If your Levoit Air Cleaner is making unusual noises while the fan is running, ensure the filter is correctly placed and that all plastic packaging has been removed. Check that the air purifier is on a hard, flat, even surface. It may also be time to replace the filters. If the problem persists, the air purifier might be damaged, or there could be a foreign object inside. Stop using it and contact Customer Support. Do not attempt to repair it yourself.
Why is the airflow significantly reduced in my Levoit LV-H132?
There are several reasons why the airflow from your Levoit Air Cleaner might be significantly reduced. First, ensure that the filters are removed from their packaging and properly placed. You can also try tapping the fan speed button to increase the fan speed. Make sure that there is at least 38 cm / 15 in of clearance on all sides of the air purifier. Finally, you may need to replace the filters.
Why is my Levoit LV-H132 not purifying air well?
There are several reasons why your Levoit Air Cleaner might not be effectively purifying air. First, try increasing the fan speed. Ensure that the sides and top of the air purifier (the inlet or outlet) aren't blocked by any objects. Close doors and windows while the air purifier is running. Also, confirm that the filters have been removed from their packaging and are correctly placed. The unit may be less effective if the room is larger than 15 m². Finally, consider replacing the filters.
Why is my Levoit LV-H132 making a strange noise?
If your Levoit Air Cleaner is making unusual noises while the fan is running, try the following: * Check that the filters are correctly placed and that all plastic packaging has been removed. * Ensure the air purifier is placed on a hard, flat, even surface to prevent vibrations. * Consider replacing the filters. * If the noise persists, the air purifier may be damaged, or there may be a foreign object inside. Stop using the air purifier and contact Customer Support. Do not attempt to repair it yourself.
How to improve airflow in my Levoit LV-H132 Air Cleaner?
If you're experiencing significantly reduced airflow from your Levoit Air Cleaner, here are a few things to check: 1. Make sure that the filters have been removed from their packaging. 2. Ensure that the filters are correctly installed. 3. Try increasing the fan speed using the control panel. 4. Ensure that there is at least 15 in / 38 cm of clearance around all sides of the air purifier to allow for proper airflow. 5. Consider replacing the filters, as they may be clogged.
Why is the filter reset light still on after replacing the air filter in my Levoit LV-H132?
If the filter reset light on your Levoit Air Cleaner stays on after replacing the filter, it means the filter lifetime wasn't reset correctly. To reset it, press and hold the filter reset button for 3 seconds until the button lights up, then press and hold it again until the light turns off.
General| Power Consumption | 28W |
|---|---|
| Fan Speeds | 3 |
| Voltage | 120V |
| Color | White |
| Filter Type | HEPA |
| Coverage Area | 129 sq ft |
| Noise Level | 50 dB |
| Room Size | 86 sq ft |
Follow @LevoitLifestyle for wellness and style inspiration.
Essential safety rules for operating the air purifier safely and preventing hazards.
Recommendations for proper placement and environmental conditions to avoid damage.
Instructions for turning the unit on/off and adjusting fan speed.
How to use the Power and Night Light buttons for basic functions.
Guide to using the Filter Reset and Fan Speed buttons.
How to clean the purifier housing using a soft cloth and avoiding liquids.
Understanding the filter indicator light and its meaning for filter checks.
Indicators for filter replacement and recommended intervals.
Procedure for performing a hard reset, useful after filter replacement.
Details the product's warranty coverage, limitations, and terms of use.
Instructions on how to register for an additional 1-year warranty.
Procedure for returning defective products and seeking refunds within the warranty period.
To Next Page
