Lexicon
1-6
300L Owner's Manual
1
6
2
7
3
8
4
9
5
0
PROG REG
MUTE ENTER PAGECTRL MACHSTOBANK SETUP
VAR
-24 18 12 6 0 6 +12 ovld dB
L
R
About the LARC
Main Display
Shows names and values for
all selections.
Headroom Indicator
+12 dBm indicates analog or
digital clipping. Proper input
level is with +12 dB and ovld
LEDs
unlit
.
Program Select
Press to enter Program
mode. Press repeatedly to
scroll through presets in a
bank.
Control Sliders
Adjust parameter values.
Function Keys
Bank scrolls through
groups of programs or reg-
isters.
SETUP brings you to the
tope level of the user inter-
face.
STO stores edited setups
and program registers.
CTRL toggles in and out of
the control mode.
MACH toggles between
machines when Split or
Cascade setups are se-
lected.
MUTE toggles the removal
and restoration of proces-
sed audio from the outputs.
ENTER loads selected set-
ups.
PAGE steps through pages
of setup and program pa-
rameters.
Numeric Keypad
Press one of these keys to
load a program selected with
PROG or REG. Also used to
select pages.
Slider Display Keys
Show parameter name and
value in main display. Press
twice to engage vernier (fine)
adjustment mode when
available.
Slider Display Line
Shows abbreviated names
of the parameters currently
under the control of the slid-
ers. Full name appears in the
Main Display.
Register Select
Press to enter Register
mode. Press repeatedly to
scroll through registers in a
bank.
To Next Page
Loading...
