Lexicon 300L - REV 1 - Setting MIDI Channels

7-3
MIDI Operation
MIDI Out
MIDI Out
MIDI In
300L with sequencer/computer
and keyboard
OUT
MIDI
THRU IN
DO DI
DI
DO
EIAJ CP340
COMM PORT
AES/EBU
DOTIME CODE IN
PUSH
DI
PUSH
R OUT R IN
PUSH
L OUT L IN
PUSH
INPUT
GAIN
MIDI In
1
6
2
7
3
8
4
9
5
0
PROG REG
MUTE 2nd F PAGECTRL MACHSTOBANK SETUP
VAR
-24 18 12 6 0 6 +12 ovld dB
L
R
Setting MIDI Channels
The 300L can receive MIDI information on three independent channels: one for
Sysex, Dump messages, and Fixed and MAP Program Change requests for
Setups, and two channels for Dynamic MIDI MOD patches within each Machine
(A and B), as well as Programs and Registers. MIDI Channel assignments are
made in Control Mode. To select this function, press CTRL, then press PAGE
and press 5, to display the MIDI Automation, Dump, Dump Delay, and Channel
sliders.
AUTO DMP DLY CHL CHL CHL
Sliders 4,5,and 6 set MIDI channels for the System, Machine A and Machine B,
respectively.