4-33
The Algorithms and their Parameters
The Small Stereo Adjust algorithm is a scaled-down version of Stereo Adjust with
some of the specialized features omitted. It is designed to be put in Cascade
Setups ahead of PONS or Compressors.
Small Stereo
Adjust
General Description
MST (Master Fader)
BAL (Balance)
Stereo Adjustments Page One
MST is a stereo level control, with both channels equally attenuated or boosted.
From -12 to +12dB the fader moves in .25 dB increments. Below -12dB it moves
in .50 dB increments. Below -60dB the calibration comes in larger steps, finally
dropping to zero output at -72dB.
BAL implements a sine/cosine balance adjustment. Balance is smoothly ad-
justed over a wide range, with excellent resolution in the critical area around
zero. The display indicates the actual channel gains as the control is varied.
These are 6dB/octave shelving EQ controls with a range of +6 dB boost and -
18dB cut. They move in .50 dB steps from +6 to -6 dB. The crossover point is
adjusted with TXO.
BXO sets the crossover point for the BAS controls. When these are set to full
cut, the level is -3 dB at the frequency set with BXO.
BAS (EQ Shelving)
BXO (Bass Crossover)
Master Balance Rotate
Equalizer
BAS BAS BXO
TBL TBR TXO
SPEQ
Small Stereo Adjust
Parameters
PAGE ONE
MST BAL BAS BAS BXO SPEQ
OFF, -72.05DB TO +12DB L+3 TO R+3 CUT, -18DB - +6DB CUT, -18DB - +6DB 0.1-26.5KHZ CUT, -6.00 TO +6.00DB
PAGE TWO
TXO TBL TBR ROT
0.1-26.5KHZ CUT, -18DB - +6DB CUT, -18DB - +6DB L+3 TO R+3
To Next Page
Loading...
