Lexicon 300L - REV 1 - Rich Plate

Lexicon
300L Owner's Manual
4-12
Rich Plate
General Description
The Rich Plate program is denser, smoother, and more colored than other reverb
programs. When used with the SIZ control at around 16 meters, the sound is
dense and tight — ideal for percussion. Larger sizes and longer reverb times are
suitable for vocals and brass.
The Rich Plate program has five control pages with 28 adjustable parameters,
shown below.
PAGE ONE
RTM* SHP SPR* SIZ HFC PDLY
0.24-64.17SEC 0-255 0-255 4.0-39.4M 0.1-26.5KHZ, FLAT 0-1000MS
PAGE TWO
BAS XOV TDC DIF LNK RLVL
0.2X-2.0X 0.1-26.5KHZ 0.5-21.2KHZ 0-99 LINK/UNLINK OFF, -48DB-UP FULL
PAGE THREE
RAN - DL1 FB1 DL2 FB2
NONE, 1-98%,MAX - 0-2000MS -60% TO 60% 0-2000MS -60% TO 60%
PAGE FOUR
DL3 LV3 DL4 LV4 RTM RLVL
0-1000MS OFF-24.0DB, UP FULL 0-1000MS OFF-24.0DB, UP FULL .24-64.17SEC OFF, -48DB-UP FULL
PAGE FIVE
DL5 LV5 FB5 DL6 LV6 FB6
0-2800MS OFF,-24.0DB-UP FULL -93% TO 93% 0-2800MS OFF,-24.0DB-UP FULL -93% TO 93%
* Parameter ranges are dependent on settings of SIZ and LNK.
Rich Plate Parameters
Delay 1
Delay 3
Diffusion Predelay
Delay 2
Delay 4
Σ
Σ
Delay 5 Level 5
Level 3
Level 4
Σ
Σ
Level 6Delay 6
R Level
Reverberator
Σ
Σ
High Frequency
Cutoff
RTM SIZ SHP SPR
XOV BAS TDC LNK
RAN
Feedback 1
Feedback 2
Feedback 6
Feedback 5