Lexicon 300L - REV 1 - Checking Your Systems Status

2-5
System Overview
Checking Your
System's Status
Press CTRL to enter Control Mode. Press PAGE, then press 1. Move slider 1
(SEL) on Page one of the control program for a quick display of the following
information:
INPUT TYPE
SAMPLE RATE
DIG CONNECT
OUTPUT TYPE
PATCH POINTS
OUTPUT FORMAT
I/O EMPHASIS
EMPHASIS IN
SCMS
BYPASS MODE
LOAD MODE
MIDI AUTOMATION
MIDI CHANNEL
SYSTEM: MACH A, B
MIDI MAP MODE
TIME CODE
CURRENT SETUP
CURRENT EFFECT(S)
300L Power-Up State
Normally if power is lost, or turned off, and then restored, the 300L will return to
its last previous state.