3-7
System Operation
Fixed Format
L
R
MA
Level
EFFECT
EDIT A
L
Out
R
Out
Analog or
Digital
MB
Level
MA
Balance
MB
Balance
Dry
EFFECT
EDIT B
A
Mix
B
Mix
Dry
Patch Points
Patch Points
When
both
Analog and Digital are specified to operate as MAIN Inputs, we refer
to it as "Mixed Format." The Mixed format gives you the option of using the left,
right, or summed mono input signals of each type of input(Analog or Digital). In
this format, patch points are given up. The parameters for determining what
blend of Left/Right is passed to each Machine (A and B), are "MA: BAL" and “MB:
BAL", located on Page Two of the Setup mode.
MA: LVL BAL MB: LVL BAL
Mixed Format
If you want to input both analog and digital audio into a Dual-Mono setup(Mixed
format), press CTRL to enter the Control mode. Page One sets the input and
output configuration for the current setup. The INP slider will scroll you through
the available selections: ANALOG or DIGITAL as well as ANA-L DIG-R and
ANA-R DIG L. In mixed format, analog audio feeds the Input to Machine A,
digital audio feeds the Input to Machine B , or vice-versa.
Machine A audio comes out Analog left (and digital left)
Machine B audio comes out Digital right (and analog right)
L
R
MA
Level
EFFECT
EDIT A
L
Out
R
Out
Analog
MB
Level
MA
Balance
MB
Balance
Dry
EFFECT
EDIT B
A
Mix
B
Mix
Dry
R
Digital
L
To Next Page
Loading...
