Lexicon 300L - REV 1 - Page 62

3-33
System Operation
This page provides the controls for setting the analog Input and Output Gains
before and after the converters. Only sliders 2 and 3 (LFT and RT input gain) and
sliders 5 and 6 (LFT and RT output gain) are active.
IN: LFT RT OUT: LFT RT
IN: LFT
Sets the input gain for the left channel
IN: RT
Sets the input gain for the right channel.
OUT: LFT
Sets the output gain for the left channel
OUT: RT
Sets the output gain for the right channel.
Page Nine
Input/Output Gains