Lexicon
300L Owner's Manual
4-4
Random Hall
Parameters
Random Hall Page One
RTM sets the reverb time for mid-frequency signals. Because low-frequency
reverb time (BAS) is a multiplier of RTM, RTM acts as a master control for the
reverb time.
SHP and SPR work together to control the overall ambience of the reverberation
created by the 300L. SHP determines the contour of the reverberation envelope.
With SHP all the way down, reverberation builds explosively, and decays
quickly.
RTM (Mid-Frequency
Reverb Time)
SHP (Shape)
PAGE ONE
RTM* SHP SPR* SIZ HFC PDLY
.24-64.17S 0-255 0-255 4.0-39.4METERS 0.1-26.5KHZ, FLAT 0-1000MS
PAGE TWO
BAS XOV TDC DIF LNK RLVL
0.2X-4.0X 0.1-26.5KHZ 0.5-21.2KHZ 0-99 LINK/UNLINK OFF, -48DB-UP FULL
PAGE THREE
SPN WAN RTM SHLF
0-48 0µS-37.1MS .24-64.17S OFF, -48DB-UP FULL
PAGE FOUR
DL1 LV1 DL2 LV2 RTM RLVL
0-1000MS OFF-24.0DB-UP FULL 0-1000MS OFF-24.0DB-UP FULL .02-64.17S OFF-48DB-UP FULL
PAGE FIVE
DL3 LV3 FB3 DL4 LV4 FB4
0-2800MS OFF-24.0DB-UP FULL -93 TO +93% 0-2800MS OFF-24.0DB-UP FULL -93 TO +93%
* Parameter ranges are dependent on settings of SIZ and LNK.
Diffusion Predelay
R Level
Reverberator
Delay 1
Σ
Feedback 3
Delay 3 Level 3
Level 1
Σ
Delay 2
Σ
Level 2
Σ
Level 4Delay 4
High Frequency
Cutoff
RTM SIZ SHP SPR
XOV BAS TDC LNK
SPN WAN SHLF
Feedback 4
To Next Page
Loading...
