Lexicon
300L Owner's Manual
4-8
RLVL sets the amount of reverberation in the processed signal. It is normally
FULL, but may be reduced for effects where the pre-echoes should dominate.
Random Hall Page Five
Pre-Echo 3, 2.8 seconds maximum to left channel, with feedback.
Pre-Echo 4, 2.8 seconds maximum to right channel, with feedback.
* A quick "double-click" on the DL3 or DL4 slider button will allow you to control
the delay with more resolution. To exit this fine control mode, double-click on the
button again.
RLVL (Reverb Level)
DL3*, LV3, FB3
DL4*, LV4, FB4
To Next Page
Loading...
