Lexicon 300L - REV 1 - Page 89

Lexicon
300L Owner's Manual
4-26
Dual Delays
Parameters
Σ
Σ
Delay 2
AP 2 APD 2 FB 2
Delay 4 R Delay R Pan
Σ
Σ
Delay 3 L Delay L Pan
AP 1 APD 1 FB 1
Delay 1
FB 3
FB 4
Flanger
Σ
Σ
LFG
RFG
FBD
FBD
FDL
FDL
PAGE ONE
FDL* FBD* FBD* LFG RFG
0-19.947MS 0-19.947MS 0-19.947MS -99% TO +99% -99% TO +99%
PAGE TWO
DL1* FB1 DL2* FB2
0-2498.917MS -99% TO +99% 0-2498.917MS 0-99%
PAGE THREE
AP1 APD1* - AP2 APD2*
0-191 0-9.963MS - 0-191 0-9.963MS
PAGE FOUR
DL3* FB3 DL4* FB4
0-2498.917MS -99% TO +99% 0-2498.917MS -99% TO +99%
PAGE FIVE
LDL* LPAN - RDL* RPAN
0-2498.917MS L, 0-98%R/L, R 0-2498.917MS L, 0-98%R/L, R
* Parameter ranges are dependent on setting of Sample Rate.
Dual Delays Page One
FDL is a separate 20 ms ganged gliding stereo delay line.
The FBD controls are base delays which get summed with the stereo ganged
flange delay.These base delays are adjustable throughout a 20 millisecond
range.
LFG and RFG are flange gains which are adjustabe as a feed forward amplifier
loop (+99% positive value) or feedback amplifier loop (-99% negative value).
FDL (Flange Delay)
FBD (Left and Right Flange
Base Delays)
LFG and RFG (Left and
Right Flange Gain)