Lexicon 300L - REV 1 - Page 99

Lexicon
300L Owner's Manual
4-36
Compressor
Parameters
Compressor Page One
THR sets the level at which compression starts.
SLP controls the slope of the gain reduction curve or the ratio of input level versus
output level.
GAIN adjusts the gain of low level signals (below the compression threshold).
ATC adjusts the attack time constant.
RTC allows adjustment of the release time constant.
DLY sets the predelay of the audio before the digital VCA.
THR (Threshold)
SLP (Slope)
GAIN
ATC (Attack Time
Constant)
RTC (Release
Time Constant)
DLY (Look Ahead Delay)
L
R
Expander
Compressor
Predelay
Compressor Gain
Expander Gain
SLP THR
ATC RTC
EXS EXT
PAGE ONE
THR SLP GAIN ATC RTC DLY
0 to -40DB 1.0-99.99:1 0 to +24DB 7-960MS 16-4000MS 0-48MS
PAGE TWO
EXT EXS EXG
0 to -70DB 1.0-99.99:1 0 to -24DB